Photo Jewelry Seal-Itz Tutorial

Photo Jewelry Seal-Itz Strips w Glass Tutorial

1. Print your photos according to the EZ Resizer instructions.


3. Carefully place the Seal-Itz adhesive side down onto the photo, making sure to smooth it out to avoid air pockets. Press firmly, and make sure to press out any air pockets that may remain.



4. Remove the orange backing from the Seal-Itz strip. Place the glass piece firmly onto the exposed adhesive.

5. Carefully cut out around the glass piece on the photo paper.

6. Repeat the process on the back using a second Seal-Itz strip to adhere your completed glass/photo piece into the pendant frame.