Photo Jewelry Making Tutorial

Wondering how to make photo jewelry? It's fun and easy to create your own photo pendants, photo necklaces, photo rings, photo keychains, and more!

*Please ensure you are viewing the correct instructions for your cover type as we currently carry more than one style*

 

Krystal Clear-itz Photo Jewelry Clear Cover Tutorial

1. Access photo resizer program. Information on how to access the program is included in your package.

2. Follow prompts to crop and resize your photo to create finished file ready for printing.

3. Print photo file onto your desired paper. We recommend regular printer paper or a thin matte style photo paper (glossy thick paper is not recommended).

Note: If you are having issues with your resized photo printing out too large or small, double check your printer settings to ensure you do not have any options such as "fit to page" or "stretch to fit" selected. You will need to print at 100% to ensure correct sizing.

4. Remove the Krystal Clear-Itz clear cover and adhesive strip from packaging. Peel the clear cover from its backing to expose adhesive and place on top of your printed and resized photo. Push down firmly and ensure it has fully adhered.

5. Cut out around your covered photo

6. Pick up the other piece (adhesive strip) and remove one side to expose adhesive. Press stick side down into frame and remove other side of backing to expose the other side of the adhesive.

7. Press your cut out Krystal Clear-itz covered photo onto the exposed adhesive and press firmly to seal into frame.

 

 

Glass and Seal-itz Sheets Tutorial


1. Access photo resizer program. Information on how to access the program is included in your package.

2. Follow prompts to crop and resize your photo

3. Print photo file onto your desired paper. We recommend regular printer paper or a thin matte style photo paper (glossy thick paper is not recommended).

Note: if you are having issues with your resized photo printing out too large or small, double check your printer settings to ensure you do not have any options such as "fit to page" or "stretch to fit" selected. You will need to print at 100% to ensure correct sizing.

4. Cut out a piece of Seal-itz strip that is approximately the same size as the glass you are using.
Note: To accomplish this you can lay your glass on the sheet and cut a rough square or rectangle around it. Try to cut as closely as possible to ensure that you will not unnecessarily use more Seal-itz than needed.

5. Remove the white backing from your cut out piece of Seal-Itz strip to expose the adhesive.

6. Carefully place your glass in the center of the exposed adhesive. Press firmly, and make sure to press out any air pockets that may remain.

7. Remove the blue backing from the strip, and place the glass piece with adhesive firmly over your printed photo.

8. Carefully cut out around the glass piece on the photo paper.

9. Repeat the process on the back using a second piece of Seal-Itz strip to adhere your completed glass/photo piece into the photo frame.


In depth photo tutorials coming soon!